توضیحات
آلایمنت لیزری Fixturlaser Go Basic
– عدم محدودیت قطر شفت
– فاصله مجاز بین سنسورهای اندازه گیری تا طول 5 متر
– دتکتور منحصر به فرد به طول 30 میلیمتر
– استفاده از خط لیزر به جای نقطه لیزر
– نمایش لحظه ای وضعیت ماشین در طول آلایمنت
– قابلیت آلایمنت کردن شفت های افقی و عمودی
– قابلیت بررسی لقی پایه ها به صورت اتواتیک
– عدم نیاز به انجام Pre Alignment
– امکان اعمال ناهمراستایی عمدی
– امکان مدیریت فایل ها و تهیه گزارش
توضیحات محصول
FIXTURLASER GO BASIC – COMPLETE SYSTEM
Weight (incl. all standard parts)
5,0 kg (11,0 lbs)
Storage Temperature
-20 to 70°C (-4 to 158°F)
Case
Material
High Impact ABS Plastic
Environmental protection:
Dust, water (5m/16 feet), and air tight with air pressure compensation valve
Drop Test:
3 m (10 feet) on to concrete floor
Dimensions
415 mm x 325 mm x 180 mm (16 in x 13 in x 7 in)
Display Unit
Housing Material
High impact ABS plastic and TPE rubber
Operating Temp:
-10 to 60°C ( 14 to 140°F)
Storage Temp:
-20 to 70°C (-4 to 158°F)
Relative Humidity:
10 – 90%
Weight
0,66 kg (1,46 lbs) with batteries
Dimensions
205 mm x 116 mm x 56 mm (8.1 in x 4.6 in x 2.2 in)
Environmental Protection:
IP 54
Flash storage memory
500 Mb
Display size
4” (102 mm) diagonal (84 x 56 mm)
Interface
Membrane Switch Keyboard
Peripherals
2 RS-485, 1 USB slave port
Power supply:
3 x 1,5V LR-14 (C) Alkaline batteries or 1,2V NiMH HR-14 Rechargeable Nickel Metal Hybride cells
Operating Time:
30 hours typical use
LED Indicators
Green/Red
Sensor Units
Housing Material
Anodized aluminum and high impact ABS plastic molded over with TPE rubber
Operating Temp
-10 to 60°C (14 to 140°F)
Relative Humidity
10 – 90%
Weight
170 g (6,0 oz)
Dimensions
79 mm x 77 mm x 34 mm (3,4 in x 3,0 in x 1,3 in)
Environmental Protection:
IP 65 (Dust tight and protected against water jets)
Laser
650 nm class II diode laser
Laser Line Fan Angle
6°
Laser line width (1/e2):
1,6 mm
Laser line divergence (full angle):
0.25 mrad
Laser Power:
« 1 mW
Measurement distance:
Up to 5 m
Detector
CCD
Detector length:
30 mm (1.2 in)
Detector angular sub tense
30 mrad/m (3 mm/100 mm per meter)
Detector resolution:
1 µm
Measurement accuracy
0.3% ± 7 µm
LED Indicators:
Laser transmission and status indicators
Inclinometer resolution
0.1°
Inclinometer accuracy:
±0.5°
Ambient light protection:
Optical filtering and ambient light signal rejection
Shaft brackets
Fixture
V-fixture with non-twisting chain, width 20 mm (0,79 in)
Material
Anodized aluminum
Shaft diameter
Ø 25-175 mm (1”-6.9”)
Ø 25-450 mm (1”-18”) (with extension chains)
Rods
4 pcs 150 mm (5.9 in)
تلگرام
ایتا
ستاره دار
